CONVERT – Cast Iron Deep Well Convertible Jet Pump

The versatility of this pump allows it to be used in different applications such as shallow or deep wells. In all its
different configurations, CONVERT is a self-priming pump, which means that, after the first priming, there will be no
need for the pump to be primed again.
The pump’s design and features guarantee complete customer satisfaction. Every component was carefully
manufactured to assure the best performance and reliability. CONVERT’S construction is suitable for outdoor
applications.
CONVERT comes equipped with a PEARL pressure switch for quick installation.
One of the biggest advantages when using CONVERT is the possibility to service the pump without removing the
pipes from the adapter.

Click to enlarge

APPLICATIONS

- Domestic water supply out of a well at desirable pressure.
- Lifting water containing air or other gasses.
- Boost pressure from flooded suction.
- Garden maintenance (see operating conditions).

OPERATING CONDITIONS

Liquid temperature:	32° F – 150° F
Maximum working pressure:	125 PSI
Continuous:	duty

CONSTRUCTION

Closed coupled self-priming multistage centrifugal pump
High-quality components for domestic water supply and irrigation concerning low lead requirements
Connections threaded ports NPT
All hardware in Stainless Steel
Pre-drilled priming port with plug
Pre-drilled drain port with plug for maintenance
U shape base on all models gives complete full support to the pump

MOTOR

Nema standard ODP 56 J motor for much cooler surface temperature
Thermal overload protection
Capacitor start – capacitor run type motor for the ½ – ¾ Hp versions
Permanent Split Capacitor (PSC) without centrifugal switch for the 1 – 1½ Hp versions
Front bearing 6204 for a much longer life span
All copper winding
Class F Dupont Nomex Insulation System, cCSAus approved
Single phase ½ – ¾ – 1 – 1½ Hp, 115/230 V
Easy voltage conversion
Maximum ambient temperature admitted: 40 °C (104 °F)
Assembled with Pearl Pressure Switch